C
RAMPP fox trip casing spears are manufactured in two, three and four slip design. They are used in pulling pipe that is to be recovered from the hole. Where continued jarring is necessary, the four slip type spear is recommended as it enables the slips to contact the entire circumference of the pipe which prevents it from becoming elongated. The tool may be tripped and withdrawn when desired, and it is suggested that a new grip be taken every so often to insure that the pipe does not become distorted. RAMPP casing spears are made for tough jobs. When ordering, be sure to specify the number of slips, inside diameter of the pipe to be pulled, the weight of the pipe and the size tool joint.
Fox trip three and four slip
RAMPP tubing spears are furnished with 2 slips and are engineered for maximum tubing recovery. This spear can be furnished with pipe tubing or tool joints and can be supplied with or without bowl and guide.
When ordering, please specify:
- If spear is run on tubing, pipe or cable tools
- Size of tubing to be caught
- I.D. of casing in which spear is to be used
Two-slip, less bowl & guide - with tubing connection
Two-slip, with bowl & guide - with tubing connection
